ADC09SJ1300-Q1 is an automotive single-channel, 9-bit, 1.3GSPS analog-to-digital converter with JESD204C interface

The ADC09SJ1300-Q1 is an AD841SQ family of quad, dual and single, 9-bit, 1.3 GSPS analog-to-digital converters (ADCs). Low power consumption, high sampling rate, and 9-bit resolution make the ADC09SJ1300-Q1 ideal for light detection and ranging (LiDAR) systems. The ADC09SJ1300-Q1 is qualified for automotive applications.

The 6 GHz full power input bandwidth (-3 dB) provides a flat frequency response for frequency modulated continuous wave (FMCW) lidar systems and a narrow impulse response for pulse-based systems. The full power input bandwidth also supports direct RF sampling up to 4 GHz.

characteristic:

AEC-Q100 qualified for automotive applications:

○ Temperature Class 1: -40°C to +125°C, T A

●ADC core:

○ Resolution: 9 bits

○ Maximum sampling rate: 1.3 GSPS

○ Non-interleaved architecture

○ Internal jitter reduces higher harmonics

●Performance Specifications (–1 dBFS):

○ Signal-to-noise ratio (100 MHz): 53.5 dBFS

○ENOB (100 MHz): 8.5 bits

○SFDR (100 MHz): 64 dBc

○ Noise Floor (–20 dBFS): –143 dBFS

●Full scale input voltage: 800 mV PP-DIFF

●Full power input bandwidth: 6 GHz

●JESD204C serial data interface:

○ Supports 2 to 8 (quad/dual channel) or 1 to 4 (single channel) total SerDes channels

○ Maximum baud rate: 17.16 Gbps

○64B/66B and 8B/10B encoding modes

○ Subclass 1 support for deterministic latency

○ Compatible with JESD204B receiver

● Optional internal sample clock generation

○ Internal PLL and VCO (7.2–8.2 GHz)

SYSREF windowing simplifies synchronization

● Four clock outputs simplify system clocking

○ Reference clock for FPGA or adjacent ADC

○ Reference clock for SerDes transceiver

● Timestamp input and output of pulse system

●Power consumption (1 GSPS):

○ Four channels: 450 mW/channel

○ Dual channel: 625 mW/channel

○Single channel: 940 mW

●Power supply: 1.1V, 1.9V